| - | 2022 | Switzerland | Smart Cities | Research | Hady H. Fayek and Omar H. Abdalla: “Operation of the Egyptian Power Grid with Maximum Penetration Level of Renewable Energies Using Corona Virus Optimization Algorithm” Smart Cities, Vol. 5, No. 1, pp. 34-53, 5 January, 2022 |
| - | 2022 | USA | Energy Eng | Research | Omar H. Abdalla, Gamal Abdel-Salam, Azza A. A. Mostafa: “Multifunction Battery Energy Storage System for Distribution Networks”, Energy Engineering, Vol 119, No. 2, pp. 569-589, Tech Science Press, 25 January, 2022. https://www.techscience.com/energy/v119n2/46661 |
| - | 2022 | UK | ITEES | Research |
Omar H. Abdalla, and Azza Mostafa: “Optimal Number and Locations of Smart RMUs for Self-Healing Distribution Networks”, International Transactions on Electrical Energy Systems, vol. 2022, Article ID 4819129, 14 pages, 2022. https://doi.org/10.1155/2022/4819129 |
| - | 2022 | | Ain Shams Engineering Journal, vol. 13, no. 6 | Research |
LAMAS: Lightweight anonymous mutual authentication scheme for securing fog computing environments |
- | 2022 | | Expert Systems with Applications, vol. 197 | Research |
GBO-kNN a new framework for enhancing the performance of ligand-based virtual screening for drug discovery | | - | 2022 | | IAENG International Journal of Computer Science | Research |
Predicative Model for Accident Severity |
| - | 2022 | Electronic Research Institute, Egypt | JESIT Journal of Electrical Systems and Information Technology 9 | Journal |
Design of a maximum power point tracking-based PID controller for DC converter of stand-alone PV system |
| Q2 | 2022 | | 5th International Conference on Advanced Systems and Emergent Technologies, IC_ASET 2022. IEEE | |
“Frequency stability enhancement of AC microgrid with high share of wind energy”, |
| 2022 | | To be published | |
“Frequency Support of AC Micro-grid with High Penetration of Photovoltaic using Super-capacitor |
| 8.2 | 2022 | | Journal of Energy Storage, Elsevier | Research |
Optimal virtual synchronous generator control of battery/supercapacitor hybrid energy storage system for frequency response enhancement of photovoltaic/diesel microgrid” |
| 6.5 | 2022 | | Sustainable Energy Technologies and Assessments Journal, Elsevier | Research | Isolated microgrid stability reinforcement using optimally controlled STATCOM |
| 3.1 | 2022 | | International Review of Automatic Control (I.RE.A.CO.) , 2022. | Research | Environmental Effects on the Optimal Performance of Photovoltaic Power Systems |
| 2022 | Institute of Science and Technology, India | Applications of Artificial Intelligence in Additive Manufacturing (BOOK) | A chapter in a book | Regression and Artificial Intelligence Models to predict the Surface Roughness in Addative Manufacturing |
| 2022 | Institute of Science and Technology, India | Applications of Artificial Intelligence in Additive Manufacturing (BOOK) | A chapter in a book | Optimizing Robotic WAAM |
| 2.812 | 2022 | USA | Experet system | Research | Analysing biosensor clinical pathogen information using mayfly optimized convolute neural network approach |
| 4.79 | 2022 | Egypt | Ain Shams Engineering Journal | Research | LAMAS: Lightweight Anonymous Mutual Authentication Scheme for Securing Fog Computing Environment |
| 2022 | Tunisia | 2022 5th International Conference on Advanced Systems and Emergent Technologies (IEEE) | International conference | Frequency stability enhancement of AC microgrid with high share of wind energy |
| 2022 | UK | Sustainable Energy Technologies and Assessments(Elsevier) | International Jornal | Frequency support of AC microgrid with high penetration of photovoltaic using super-capacitor |
| 2022 | | 2021 18th International Conference on Computer Engineering and Systems (ICCES) | IEEE Conference Paper | A Dynamic Cooperative Multi-Agent Online Coverage Path Planning Algorithm |
| 2022 | | 2021 18th International Conference on Computer Engineering and Systems (ICCES) | IEEE Conference Paper | A Dynamic Cooperative Multi-Agent Online Coverage Path Planning Algorithm |
| 2022 | South Koria | International Conference on Electronics, Information, and Communication | Research | Violation Detection Technique for COVID-19 Self-Isolation and Control Measures using Wireless and Geofencing Technologies |
| 2022 | Tunisia | IEEE Global Engineering Education Conference | Research | Identifying Success Criteria for Sustainable AI-based Online Laboratory Courseware System |
| 2022 | Turkey | 9th International Conference on Electrical and Electronics Engineering | Research | IoT Enabled Geofencing-Based System for Monitoring and Enforcing COVID-19 Control Measures in Workplaces, Service Areas and Distributed Home Quarantine |
| 2022 | Itali | 7th International Conference on Machine Learning Technologies | Research | Dynamic User-Centric Clustered Workplaces for COVID-19 Control Measures Based on Geofencing and Deep Learning |
| 2022 | Egypt | IEEE Transactions on Industry Applications | Research | Real-Time Wide Area Event Identification and Analysis in Power Grid Based on EWAMS |
| 2022 | | Progress In Electromagnetics Research C | Research | Beamforming for 5G Cellular Communications with Analyzing the Linear and Circular Polarized Antenna Arrays Gain Effect |
| 2022 | | Journal of Nanomaterials | Research | B. Srimanickam, M. Elangovan, S. Salunkhe, E. Abouel Nasr, H.M.A. Hussein, R. Shanmugam, “Experimental Studies on Water-Based Al2 O 3 Nanofluid to Enhance the Performance of the Hybrid Collector.”, Journal of Nanomaterials Article, ID 9385416 |
| 2022 | | | Research | R. Soni, S. Pande, S. Salunkhe, H. Natu, E. Abouel Nasr, R. Shanmugam, H.M.A. Hussein, |
| 2022 | | | Research | A.P. Murali, D. Ganesan, S. Salunkhe, E. Abouel Nasr, J.P. Davim, H.M.A. Hussein, “Characterization of Microstructure and High Temperature Compressive Strength of Austenitic Stainless Steel (21-4N) through Powder Metallurgy Route.”, Crystals 2022, 12, 923. |
| 2022 | | Lubricants | Research | B. Alqahtani, W. Hoziefa, H.M.A. Hussein, M. Hamoud, S. Salunkhe, A.B. Elshalakany M. Abdel-Mottaleb, J.P. Davim, “Tribological Performance and Rheological Properties of Engine Oil with Graphene Nano-Additives.”, Lubricants 2022, 10, 137., https://doi.org/10.3390 , |
| 2022 | | Energy Sci Eng | Research | N.S. Senthur, C. Anand, M.R. Kumar, P.V. Elumalai, M.I. Shajahan, A.C. Benim, E.S. Abouel Nasr, H.M.A. Hussein, M. Parthasarathy, “Influence of cobalt chromium nanoparticles in homogeneous charge compression ignition engine operated with citronella oil.”, 2022 The Authors. Energy Science & Engineering published by the Society of Chemical Industry and John Wiley & Sons Ltd, Energy Sci Eng. 2022;00:1–13. |
| 2022 | | Appl. Sci. | Research | V. Nagarajan, A. Solaiyappan, S.K. Mahalingam, L. Nagarajan, S. Salunkhe, E.A. Nasr, R. Shanmugam, H.M.A. Hussein, “Meta-Heuristic Technique-Based Parametric Optimization for Electrochemical Machining of Monel 400 Alloys to Investigate the Material Removal Rate and the Sludge.”, Appl. Sci. 2022, 12, 2793. https://doi.org/10.3390/app12062793 |
| 2022 | | Lecture Notes in Mechanical Engineering, H. K. Dave et al. (eds.), Recent Advances in Manufacturing Processes and Systems | chapter in book | A.S. Sobh, H.M. A. Hussien, A. Abd El-Aty, “Designing and Developing of a Renewable Agrobot to Enhance Harvest Productivity and Reduce Water Consumption.”, Lecture Notes in Mechanical Engineering, H. K. Dave et al. (eds.), Recent Advances in Manufacturing Processes and Systems, pp.415-426, https://doi.org/10.1007/978-981-16-7787-8_16 |
| 2022 | | Lecture Notes in Mechanical Engineering, H. K. Dave et al. (eds.), Recent Advances in Manufacturing Processes and Systems | Chapter in book | A.A.M. Okasha, H.M.A. Hussein, M. Shazly, O.M. Dawood, “Characterization of Damage Behavior during Hot Forging.”, Lecture Notes in Mechanical Engineering, H. K. Dave et al. (eds.), Recent Advances in Manufacturing Processes and Systems, pp.223-242 |
| 2022 | | Materials | Research | B. Murali, B.M. Vijaya Ramnath, D. Rajamani, E.A. Nasr, A. Astarita, H.M.A. Hussein, “Experimental Investigations on Dry Sliding Wear Behavior of Kevlar and Natural Fiber‐Reinforced Hybrid Composites through an RSM–GRA Hybrid Approach.”, Materials 2022, 15, 749. https://doi.org/10.3390/ma15030749 |
| 2022 | | JREE | Research | P. Sambandam, P. Murugesan, M.I. Shajahan, B. Sethuraman, H.M.A. Hussein, “Sustainability and Environmental Impact of Hydroxy Addition on a Light-Duty Generator Powered with an Ethanol–Gasoline Blend.”, JREE, vol.9, no.2, pp.82-92, 2022. |
| 2022 | | IAENG International Journal of Computer Science | | Solwan M. Mostafa, Sameh A. Salem, and Shahira M. Habashy, “Predictive Model for Accident Severity”, IAENG International Journal of Computer Science, 49:1, IJCS_49_1_13, Volume 49, Issue 1: March 2022 |
| 1.674 (Q2) | 2022 | | Journal of the Korean Ceramic Society. | International Journal | Production of high-quality glass foam from soda lime glass waste using SiC-AlN foaming agent. |
| 2022 | | International Journal of Materials Technology and Innovation (IJMTI) | International Journal | Synthesis of impermeable cellular glass foam from soda lime glass waste using SiC foaming agent. |
| 2022 | Egypt | Lecture Notes on Data Engineering and Communications Technologiesthis link is disabled | Book Chapter | Expert Systems in Academic Advising |
| 2022 | Mixeco | international Conference CIMPS2021 | Conference (published in a book) | New Quantum Image Manipulation System (NQIMS) |
| 2.794 | 2022 | Switzerland | Journal of Optical and Quantum Electronics | Research | Optical phase shifter design for single and multi-mode waveguide configurations |
| 4.56 | 2022 | International | Clean energy, Oxford University press | International | New Smart Home Energy Management Systems Based on Inclining Block Rate Pricing Scheme |
| 4.56 | 2022 | International | Clean energy, Oxford University press | International | PV Uncertainty Assessment for Smart Homes Real-time Energy Management System in African Developing Countries |
| 2022 | | Materials | Research | Murali, Banu, Bindu M. Vijaya Ramnath, Devaraj Rajamani, Emad A. Nasr, Antonello Astarita, and Hussein Mohamed. “Experimental Investigations on Dry Sliding Wear Behavior of Kevlar and Natural Fiber-Reinforced Hybrid Composites through an RSM–GRA Hybrid Approach”; Volume 15, Issue 3: 749, pp. 1-16 |
| 2022 | | Energies, 15(1), 363 | Research | Nitin Khedkar, Akul Bhatt, Dhruval Kapadia, Shantanu Chavan, Yash Agarwal, Emad Abouel Nasr, J. Paulo Davim, Sachin Salunkhe “Design and Structural Simulations of a custom Li-ion Accumulator for Low range, Lightweight, single-seater, open cockpit, and open-wheeled racecar” |
| 2022 | | Electric Power Systems Research, Volume 206, 107785 | Research | Mohammed A. El-Meligy, Ahmed M. El-Sherbeeny, Ahmed T.A. Soliman, Abd E. E. Abd Elgawad, Emad A. Naser, “On the solution of robust transmission expansion planning using duality theorem under polyhedral uncertainty set” |
| 2022 | | Energy Science and Engineering. Volume 10, Issue 4, PP. 1251-1263 | Research | N.S. Senthur, C Anand, M Ramesh Kumar, P.V. Elumalai, Mohamed Iqbal Shajahan, Ali Cemal Benim, Emad Abouel Nasr, H.M.A. Hussein, M. Parthasarathy, “Influence of Cobalt Chromium Nanoparticles in Homogeneous Charge Compression Ignition Engine Operated with Citronella Oil” |
| 2022 | | Applied Sciences, 12(6) | Research | Vengatajalapathi Natarajan, Ayyappan Solaiyappan, Siva Kumar Mahalingam, Lenin Nagarajan, Sachin Salunkhe, Emad Abouel Nasr, Ragavanantham Shanmugam, Hussein Mohammed Abdel Moneam Hussein, “Meta-Heuristic Techniques Based Parametric Optimization for Electrochemical Machining of Monel 400 Alloys to Investigate the Material Removal Rate and the Sludge” |
| 2022 | | Advances in Mechanical Engineering, Vol. 14(5) 1–12 | Research | Husam Kaid, Abdulrahman Al-Ahmari, Adel Al-Shayea1, Emad Abouel Nasr, Ali K Kamrani, and Haitham A Mahmoud, “Metaheuristics for Optimizing Unrelated Parallel Machines Scheduling with Unreliable Resources to Minimize Makespan”, Advances in Mechanical Engineering |
| 2022 | | Computers, Materials & Continua, vol.72, no.3, pp. 6045-6060 | Research | Haitham Elwahsh, Ahmed Elkhouly, Emad Abouel Nasr, Ali K. Kamrani, and Engy El-shafeiy, “A New Intelligent Approach for Deaf/Dumb People based on Deep Learning” |
| 2022 | | Crystals, 12(7), 923 | Research | Arun Prasad Murali, Dharmalingam Ganesan, Sachin Salunkhe, Emad Abouel Nasr, João Paulo Davim, and Hussein Mohammed Abdel Moneam Hussein, “Characterization of Microstructure and High Temperature Compressive Strength of Austenitic Stainless Steel (21-4N) through Powder Metallurgy Route” |
| 2022 | | Journal of Applied Polymer Science | Research | Hamouda M. Mousa, Mustafa Ghazali Ali, Abdelrahman I. Rezk, Emad Abouel Nasr, Kamal Hany Hussein, “Development of conductive polymeric nanofiber patches for cardiac tissue engineering application” |
| 2022 | | Crystals, Volume 12, Issue 7, 954, | Research | Raj Soni, Sarang Pande, Sachin Salunkhe, Harshad Natu, Emad Abouel Nasr, Ragavanantham Shanmugam, and Hussein Mohammed Abdel Moneam Hussein, “In Vitro and Electrochemical Characterization of Laser Cladded Ti-Nb-Ta Alloy for Biomedical Applications |
| 2022 | | Journal of Nanomaterials | Research | B. Srimanickam, M. Elangovan, Sachin Salunkhe, Emad Abouel Nasr, H. M. A. Hussein, and Ragavanantham Shanmugam, “Experimental Studies on Water-Based Al2O3 Nanofluid to Enhance the Performance of the Hybrid Collector” |
| 6.954 | 2022 | Netherlands | Expert Systems with Applications Journal | Research | “GBO-kNN a new framework for enhancing the performance of ligand-based virtual screening for drug discovery” |
| 2022 | Canda | IEEE 12th Annual Computing and Communication Workshop and Conference | Research | “The Effect of Singular-Vectors Feature Selection (SVFS) Based Hyper Dimensionality Framework in Ligand-Based Virtual Screening,” |
| 2022 | USA | Optical and Quantum Electronics | Journal | Optical Phase Shifter Design for Single and Multi-Mode Waveguide Configurations |
| 2022 | Egypt | Optical and Quantum Electronics | Research | Design and analysis of a nano-rectenna based on multi-insulator tunnel barrier for solar energy harvesting |
| 6.626 | 2022 | Egypt | Alexandria Engineering Journal | Journal | Muhammed S. Hammad, Mai S. Mabrouk, Walid I. Al-atabany, Vidan F. Ghoneim, “Genomic image representation of human coronavirus sequences for COVID-19 detection”, Alexandria Engineering Journal, 2022, ISSN 1110-0168, https://doi.org/10.1016/j.aej.2022.08.023. |
| 3.847 | 2022 | Switzerl-and | Sensors | Journal | Samee, Nagwan Abdel, Amel A. Alhussan, Vidan Fathi Ghoneim, Ghada Atteia, Reem Alkanhel, Mugahed A. Al-antari, and Yasser M. Kadah. 2022. “A Hybrid Deep Transfer Learning of CNN-Based LR-PCA for Breast Lesion Diagnosis via Medical Breast Mammograms” Sensors 22, no. 13: 4938. https://doi.org/10.3390/s22134938 |
| 2.69 | 2022 | Switzerl-and | Electronics | Journal | Alhussan, Amel Ali, Hussah Nasser AlEisa, Ghada Atteia, Nahed H. Solouma, Rania Ahmed Abdel Azeem Abul Seoud, Ola S. Ayoub, Vidan F. Ghoneim, and Nagwan Abdel Samee. 2022. “ForkJoinPcc Algorithm for Computing the Pcc Matrix in Gene Co-Expression Networks”, Electronics 11, no. 8: 1174. https://doi.org/10.3390/electronics11081174. |
| 2022 | (United Kingdom) | Sustainable Energy Technologies and Assessments | International Journal | Frequency support of AC microgrid with high penetration of photovoltaic using super-capacitor |
| 2022 | Holand | Journal of Energy Storage | International Journal | Optimal virtual synchronous generator control of battery/supercapacitor hybrid energy storage system for frequency response enhancement of photovoltaic/diesel microgrid |
| 2022 | Eygpt | International Journal of Advanced Engineering and Business | Local Journal | Proportional and Integral Variable Structure Controller (PI–VSC) for Grid Connected PWM Voltage Source Converter |
| 2022 | China | Journal of Modern Industry and Manufacturing | Article | Proportional and Integral Variable Structure Controller (PI–VSC) for Grid Connected PWM Voltage Source Converter |
| 1.41, Q2 | 2022 | Serbia | Tribology in Idustry | Research | Friction Coefficient of Rubber Shoe Sole Sliding Against Different Rubber Floor Tiles |
| 3.7 | 2022 | Serbia | Energies | International | An Analysis of Research Trends in the Sustainability of Production Palnning |
| 2022 | Eygpt | Engineering Research Journal (ERJ) | Local | A Literature Review of Maintenance Performance of Power Station Systems Design |
| 2022 | Eygpt | Engineering Research Journal (ERJ) | Local | Multi response optimization of quality characteristics in Offset printing industry using Taguchi approach and Grey relational analysis |
| 1.4 | 2022 | Eygpt | Beni-Suef Univ J Basic Appl Sci | Research | A new algorithm for optimal process parameters based on minimum building time in additive manufacturing |
| 3.854 | 2022 | Switzerland | Lubricants | Research | Tribological performance and rheological properties of engine oil with graphene nano additives |
| 1.27 | 2022 | USA | Metallography, Microstructure, and Analysis | international | Static and Fatigue Characteristics of Heat-Treated Ti–6Al–3Mo–2Zr–2Sn–2Nb–1.5Cr–0.1Si Alloy |
| 2022 | Eygpt | The Bulletin of Tabbin Institute for Metallurgical Studies (TIMS) | Local | Influence of Welding Variables on Resistance Welding of Dissimilar Metals Quality |
| 2022 | | Sensors | | Ahmed M. Abd El-Haleem, Noor El-Deen M. Mohamed, Mostafa M. Abdelhakam, and Mahmoud M. Elmesalawy. 2022. “A Machine Learning Approach for Movement Monitoring in Clustered Workplaces to Control COVID-19 Based on Geofencing and Fusion of Wi-Fi and Magnetic Field Metrics” Sensors, no. 15: 5643, 2022. |
| 3.847 | 2022 | Switzerland | Sensors | Research | A Machine Learning Approach for Movement Monitoring in Clustered Workplaces to Control COVID-19 Based on Geofencing and Fusion of Wi-Fi and Magnetic Field Metrics |
